Teethpaste Tube Squeezer

When your Teethpaste tube is almost empty use your tube squeezer to get the last of your Teethpaste out of your tube.

1. Lay your tube flat on the bench, and hold the rounded edge of your tube squeezer in one hand. Holding the sealed end of the tube squeezer with your other hand, push the straight edge of the tube squeezer down the tube from the sealed end towards the lid of your tube to push Teethpaste towards the opening.
2. Next, with the rounded edge facing you, position the slit of your tube squeezer over the sealed end of the tube.
3. With your tube standing on its lid, grip both sides of the tube squeezer with your thumb and forefingers, then pull the tube squeezer down towards the opening of the Teethpaste tube.
4. Now remove your tube squeezer from the tube, then squirt out Teethpaste onto your toothbrush as normal.
5. When you can no longer squeeze out the remaining Teethpaste in your tube, cut open the sealed end of the tube and use up any remaining Teethpaste from inside the tube before recycling (see instructions below). If there is enough residual product inside the cut open tube for more than one brush, use your Teethpaste Tube Squeezer to re-seal the tube in between uses until all the product has been used up.

How to Recycle Teethpaste Tubes
To recycle your Teethpaste tube, peel off the labels, and cut open the tube. Thoroughly clean out any residual product and recycle as normal.